SPTC Private Services
SPTC also offer some private work services. below is a list of the kind of mechanical work we offer. For more information and pricing details please contact us on 280280 or e-mail us at inquiry@sptc.sc
| s. no | Description | work to be done |
| 1 | Crankshaft | Grinding from standard to 0.25mm undersize for heavy duty vehicles |
| 2 | Crankshaft | Grinding from standard to 0.50mm undersize for heavy duty vehicles |
| 3 | Crankshaft | Grinding from standard to 0.75mm undersize for heavy duty vehicles |
| 4 | Crankshaft | Grinding from standard to 1.00mm undersize for heavy duty vehicles |
| 5 | Crankshaft | Lapping of all pins for heavy duty vehicles |
| 6 | Crankshaft | Align and remove bend for heavy duty vehicles |
| 7 | Crankshaft | Check float on block complete with bearings |
| 8 | Connecting rod | Fix and rebore bush to size (customer supply) |
| 9 | Camshaft | Fix and rebore bush to size (customer supply) |
| 10 | Cylinder Block | Bore and hone cylinder bore to oversize |
| 11 | Cylinder Block | Fix liner, rebore, hone and cross hatch (parts customer supply) |
| 12 | Cylinder Block | Body bore, to fix liner, hone and cross hatch (parts customer supply) |
| 13 | Cylinder Block | Line boring at main journal site |
| 14 | Fuel Injection Pump | Phasing and calibration |
| 15 | Fuel Injection Pump | Testing of fuel output only per cylinder |
| 16 | Fuel Injection Pump | Repair, test, phase and calibrate (parts customer supply) |
| 17 | Injector | Repair and testing (parts customer supply) |
| 18 | Fuel Injection Pump | Opacity test on vehicle |
| 19 | Starter | At actuals + spare parts cost or customer supply / per hour |
| 20 | Alternator | At actuals + spare parts cost or customer supply / per hour |
| 21 | Cylinder Head | Skim cylinder head up to 19 inches |
| 22 | Cylinder Head | Skim cylinder head up to 24 inches |
| 23 | Cylinder Head (aluminium) | To check flatness on surface plate and polish |
| 24 | Valve seat | Manufacture valve seat, cut and press valve seat, Adjust to valve seat angle |
| 25 | Front axle | Rebore, rebush adjust and fix king pin Manufacturecotter pin |
| 26 | Disc brake | Skim brake disc of up to 300mm diameter |
| 27 | Cylinder head | Fix valve seat and adjust valve seat to match valve |
| 28 | Cylinder head | Press fit valve guides |
| 1 | Crankshaft | Grinding from standard to 0.25mm undersize for cars |
| 2 | Crankshaft | Grinding from standard to 0.50mm undersize for cars |
| 3 | Crankshaft | Grinding from standard to 0.75mm undersize for cars |
| 4 | Crankshaft | Grinding from standard to 1.00mm undersize for cars |
| 5 | Crankshaft | lapping of all pins for cars |
| 6 | Crankshaft | Align and remove bend for cars |